POP CORE Recap & Orchard Care Through the Seasons

Posted on Categories Blog, Home, Orchard Care, Orchard Pests, POP Orchards, Soil Care, Sprays, Tree Care, Tree DiseasesTags , , , , , , , , , , , , , , , , ,

POP kicked off its newest training program last Wednesday, March 8th at Bartram’s Garden called POPCORE: Community Orchardist Resilience Education. An endeavor to realize the potential and beauty of fully productive, well cared-for eco-orchards in every neighborhood, POPCORE seeks to encourage the self-sufficiency of our partners and connections between partners in close geographical proximity through group trainings and face-to-face sharing between partners. With increased knowledge, attention, and combined resources, the average community orchard has the potential to produce hundreds of pounds of varied produce per season in addition to being a safe, beautiful outdoor space for gathering and education.

POPCORE combines many elements of orchard stewardship, ecosystem design, and food uses that POP has learned over the past ten years,  synthesized in a 4-part series that can be taken as one-off classes or in pre-season series. Hosted back-to-back over four Wednesdays in March at Bartram’s historic garden, the course covers Pruning and Eco-orchard Seasons (March 8), Pest and Disease Management (March 15); Plants, Fungi, and What To Do With Them (March 22); and Permaculture and The Future of Philadelphia’s Food System (March 29).  Registration info here

The first class taught by POP Executive Director Phil Forsyth and Orchard Director Robyn Mello drew 21 participants, who came from a span of neighborhoods throughout the city to learn about orchard care through the seasons and the specifics of pruning fruit trees, berries & brambles, and fruiting vines, with a pre-class hands-on pruning demo hosted in Bartram’s Community Orchard.

For the health of your orchard, seasonally-appropriate care is important and POP wants you to succeed! Check out POP’s Resource Guide for PDF-downloadable handouts on topics covered during POPCORE’s first session, including orchard care by season (summarized below) a guide to pruning, and relevant POP blog posts linked below. 

Students learn techniques for wintertime pruning of fruiting shrubs in Awbury Arboretum’s food forest.

WINTER ORCHARD TASKS

PRUNING. For best production and tree health, all common fruit trees regardless of age should be pruned during their dormant season every winter, ideally between late January and early March. The basic idea is to open the tree to more air and light.

Check out POP’s guide to Pruning Fruit Trees and  Pruning Bushes, Brambles, and Vines.  

REMOVE MUMMIFIED FRUIT. Any fruit left hanging on the tree is a potential source for disease spores. Pluck and remove any mummified fruit from the orchard during pruning.

SPRAY DORMANT OIL. Apply horticultural oil, neem oil, or vegetable oil at 4% dilution to smother overwintering eggs of insects including aphids and scales.

Check out POP’s guide to Dormant/Horticultural Oil Sprays. 

MAINTAIN ORCHARD EQUIPMENT. Clean and sharpen all orchard tools. Order orchard care supplies. For PHS City Harvest participants, check out a related training on Tool Care on Saturday March 25th from 10am-noon or visit POP Partner The West Philly Tool Library for information on tool rental and care. 

Orchard liaison Tony Dorman spreads compost during a spring workday at Philadelphia Montessori Charter School

SPRING  ORCHARD TASKS

APPLY MULCH/COMPOST. Spread chipped winter prunings, shredded leaves and/or compost.

Check out POP’s guide to Ramial Wood Chips and Weeding in Place.  

HOLISTIC ORCHARD SPRAYS. Holistic sprays are composed of compost tea, liquid fish/seaweed, neem oil, and/or effective microbes. For best tree health and resistant to disease, apply up to 4 times in the spring (after bud break, at first pink of flowers, after petal fall, and two weeks after petal fall). Depending on specific pest or disease problems, some orchardists might also consider other organic sprays including the ones listed below. 

Check out POP’s guides to orchard applications of:

TRAINING. New growth can be trained to better angles using clothespins, branch spreaders, or tying to weights.

THINNING. In late May or early June, young fruitlets on peaches, apples, pears and Asian pears, and some plums should be thinned by pinching off with fingers or pruner. Peaches should be thinned to 8” apart, apples and pears to 5”, and heavy-bearing plums to 5” on the tree. Also at this time, all fruit should be removed from any newly planted trees.

Check out POP’s guide on Thinning Fruit Trees. 

BAGGING FRUIT. Place ziplock, paper, or nylon bags around young fruit (especially apples) to protect them from some insect and disease challenges.  

Check out POP’s guide to Bagging Fruit.

Community members pick berries during Strawberry Mansion’s Strawberry Festival

SUMMER ORCHARD TASKS

HARVEST. Pick fruit as they ripen, spring through fall according to fruit type. Remove or compost any fallen fruit to reduce potential pests and disease. 

Check out POP’s guide to Summer Harvest Timing and Equipment and Late-Season Fruit Ripeners.

MONITOR. Observe orchard regularly throughout the year for pest and disease problems, identify and respond appropriately with trapping, removal, or possible applications of kaolin clay, neem oil, Bt, pyrethrin, etc.

EMERGENCY PRUNING. Remove diseased or damaged wood, root suckers, and watersprouts any time of year. Be sure to sterilize tools with alcohol or bleach solution between each cut. In some cases, additional structural pruning may be done in early summer to minimize regrowth, but avoid anything but emergency pruning after July.

For more information, check out this POP guide to emergency pruning. 

Executive Director Phil Forsyth brews a batch of compost tea to apply to orchard plantings

FALL ORCHARD TASKS

APPLY COMPOST. After most leaves have fallen, spread a layer of compost or spray compost tea. An annual soil test can reveal any other specific nutrients or amendments that should be added.

Check out POP’s guide to Autumn Composting. 

We hope this seasonal breakdown provides you with a solid overview to ready yourself for maintaining the health and productivity of your orchard. Hope to see you in a POP CORE class soon!
SUPPORT US!  If you found this entry useful, informative, or inspiring, please consider a donation of any size to help POP in planting and supporting community orchards in Philadelphia: phillyorchards.org/donate.  

POP Pruning Guide: Fruit Trees

Posted on Categories Blog, Home, Orchard Care, Tree CareTags , , , , , , , , , , , ,

Pruning is the regulation of plant growth and productivity through branch removal and bud manipulation. Good pruning can help fruit trees become more resistant to pests and disease, as well as bear a larger, more consistent, and better quality harvest.  Annual pruning is strongly recommended for best health and production of the more common pome and stone fruits (apples, pears, peaches, plums, cherries, apricots).  Most uncommon fruits have less intensive pruning needs (see list at the end of this article).

GT pruning 2015
Winter fruit tree pruning workshop at Grumblethorpe historic house in Philadelphia.

WHY PRUNE?

  1. Removing dead and diseased wood helps prevent infection and the spread of disease.
  2. Pruning can improve both the quantity and quality of the harvest. The interior of unpruned trees tend to be too shady for good production. They may also demonstrate alternate-bearing: a large, low quality harvest one year followed by a very small harvest the next.
  3. Good shaping works with a plant’s natural growth habit to develop a strong primary structure that is able to support the full weight of harvests.
  4. Encouraging good branch angles can prevent them from breaking in a storm or under the weight of fruit, which can tear deep into the trunk and endanger the whole tree. A narrow crotch angle is weak; at 17 degrees or less the bark gets pinched between the branch and trunk, trapping water and promoting rot. A crotch angle between 45 and 60 degrees is ideal, because the bark can develop fully.

crotch angles

  1. sprouts and suckersPruning maximizes fruit production and health by controlling vegetative growth. Shoots, water sprouts, and vertical branches drain a tree’s energy. Suckers grow from below the graft union and divert energy from the grafted tree.
  2. Sunlight to the interior of the tree is essential for flower bud formation and fruit ripening.
  3. Increased air circulation to the interior can significantly reduce both development of fungal diseases and pest populations.

 

KNOW YOUR PLANT

How, when, and what to prune will depend on what type of tree you are working with. Be familiar with your tree’s growth habit (pyramidal, spreading, bushy, climbing, vigorous) so as to choose the pruning style best suited to the plant’s natural growth tendencies. Also learn about its fruiting habit; inadvertently pruning fruiting wood or specialized fruiting structures can seriously compromise a tree’s ability to bear fruit.  See tree list at the end of this article for more information specific to different fruit types.

 

WHEN TO PRUNE:

Damaged and diseased wood, suckers and watersprouts should be promptly pruned, no matter what time of year.  During active growing season, always sterilize tools with rubbing alcohol or a 10% bleach solution between each cut.  A spray bottle is the easiest means of application.

Most annual pruning should be done during the dormant season, before buds begin to swell, and preferably on a day when the temperature is above freezing (late January through early March in Philadelphia).  Most tree diseases are dormant in winter, thus reducing the spread of infection. However, sterilizing tools is still good practice especially with trees known to be infected.  Pruning cuts made in winter will also heal more quickly with the spring growing season to follow.

Some exceptions include…
Peaches should be pruned during or after they bloom in spring. Apples, pears, and grapes can be pruned earlier, starting in late December.  Espaliered fruit trees need both dormant and active season pruning to maintain their form.

pruning cuts

 

PRUNING METHODS

Thinning: To allow more light and air into the interior, cut branches back to their point of origin on the parent branch.  This is a highly recommended technique and the type of cut used most often.


Tipping/Heading
: The opposite of a thinning cut in that it induces more side branching.  Cut a branch back to a lateral bud heading in the direction you want the branch to grow. Make the cut ¼” above a bud (to allow for dieback) and at an angle parallel to the direction of the bud.

Damaging Cuts – Do Not Use!

Shearing: One of the worst things you can do to a fruit tree is to remove a set length from all of the outer growth, in which cuts fall randomly above and below buds. Shearing will cause a flush of dense, bushy growth, which is fine for hedges, but can ruin trees.

 

OTHER TRAINING/SHAPING METHODS

Notching: By nicking vascular tissue above or below a lateral bud, you can determine whether a bud becomes a shoot or a flower. The nick should be close to the bud, about 1/8” wide, but not deep (a mere scratch – to cut the phloem just below the bark surface). It should reach halfway around the stem. To produce a shoot, notch above dormant bud, cutting off the flow of growth hormones from terminal bud. To produce a flower, notch below the dormant bud, sending the flow of carbohydrates from the leaf to the bud instead of the rest of the tree.

Spreading, bending:  Various techniques can be used to train branches to better, more horizontal angles.  Hanging weights (molded concrete hangers, water bottles, etc,), using clothespins in late May-June, tying branches to ground or mouse guards, or using commercial or homemade limb spreaders to widen branch angles, will help make branches both sturdier and more fruitful.  Always carefully bend branches partially to side, not down, to prevent breaking.  Spreading and bending is especially important for trees with upright habits, including pears, apples, european plums, and sweet cherries.

Commercial or homemade limb spreaders can be used to train branches to more horizontal angles.

 

 

BASIC STRUCTURE OF FRUIT TREES

Central Leader

The central leader method is for trees with a strong vertical (conical, pyramidal) growth habit (apples, pears, European plums). Usually 3 tiers (whorls), each consisting of 4 branches, 6-9” apart, and spaced evenly around the trunk.

Tier #1: 2-3′ above ground
Tier #2: 5-6′ above ground
Tier #3: 8-9′ above ground

central leader

Modified Central Leader

The modified central leader is an alternate method for trees with a moderate vertical growth habit, recommended for sweet cherries and some apples and pears. 5-6 branches are left spiraling evenly up the trunk, 8-12″ apart, but the trunk is cut back to a main branch at 5-8′, and treated as open-center from that point.

mod central leader

Vase or Open-Center

Vase or open-center is used for tees with a spreading, vase-shaped growth habit (such as peaches, Japanese plums, and pie cherries). A whorl of 3-5 branches is left within 2-3′ above ground; any main trunk is cut back to the topmost branch.

open center

 

BASIC STEPS IN PRUNING

Note: As a general rule, avoid removing more than 30% of living wood in one growing season or there will be a flush of vegetative growth as the tree tries to replace the removed wood.  If a larger percentage needs to be removed for some reason, consider summer pruning to minimize regrowth.  Peaches are a notable exception in that up to 50% of living wood is removed every year.  

  1. After removing dead and diseased wood, start with bending and spreading. Then, use thinning cuts primarily, and tipping or heading only to encourage lateral branching.
  2. Don’t prune off fruiting spurs on apples, pears, apricots, and plums. On peaches and sour cherries, thin the fruit-bearing wood by removing twigs under 4-6”.
  3. Keep the central area open by removing crossed, crowded, and inward growing branches. This increases light to interior and improves air circulation.
  4. Prune for branch strength by removing branches with acute crotches (less than 17 degrees between the branch and the main trunk). Encourage wider angles by training narrow forks through spreading techniques.

 

Making the Cut:

Smaller branches.  To remove a branch less than 1” wide you will make a single cut just outside the outermost ring of the branch collar. Start by locating the branch collar, which is a swollen area of compressed rings of bark tissue/wood at the base of a branch. It is the point at which the growth pattern of the trunk overlaps that of the branch, strengthening the connection of the branch to the tree as new growth is added each year. Branch collar tissue is the tissue that heals and closes over the wound made by removing a branch. It is also a storehouse of phenolic compounds which prevent fungal diseases from entering the plant while the wound is healing.

  • Use high quality tools and sharpen them before every pruning session. Bypass pruners and handsaws are the primary tools needed for young trees.  Larger trees may require pole pruners, pole saws, or orchard ladders.
  • Make precise cuts. Never cut into the branch collar. The proper cut may leave an unsightly wedge of wood, but cutting into the branch collar reduces the tree’s capacity to heal.
  • Don’t leave a stub. If more than 1/8″ of wood is left outside the branch collar, the wound takes much longer to heal, because the healing tissue of the branch collar must grow out over that extra wood. This increases the risk of attack by insects and diseases.
  • Always make a straight, flat cut. Do not try to sculpt the cut to the contours of the branch collar as you may accidentally damage the branch collar tissue.

branch collar

Larger branches.  A three cut approach is best for pruning branches larger than 1” in thickness.  Although the final cut should be made in the same location, just outside the branch collar, preparatory cuts are recommended to avoid the weight of the branch tearing down the side of the trunk and causing significant damage to the tree.  Use a handsaw rather than a pruner to make cuts on larger branches.

  • The first cut should be made on the underside of the branch, a couple inches out from the branch collar.  Saw only a quarter to halfway through the branch.  This prevents the weight of the branch from tearing towards the trunk on the second cut.
  • The second cut should be made just beyond the first cut.  Saw all the way through the branch from the top.  This removes most of the weight of the branch.
  • Make the third and final cut just outside of the branch collar, perpendicular to the branch bark ridge.

 

PRUNING NOTES FOR SPECIFIC FRUIT TREES:

Apple (Malus)- Preferred form depends on variety, but central leader or modified central leader works for most.  Spreading/bending branches is recommended.  Thin fruit to 5” apart.

Apricot (Prunus armeniaca)- Open center or modified central leader.  Thin fruit to 2” apart if necessary.

Cherry, Sweet (Prunus avium)- Modified central leader.  Head leader to create sidebranching.

Cherry, Tart (Prunus cerasus)- Open center or modified central leader.

Fig (Ficus)- In protected sites, can be grown as open center form.  In spring, remove winterkilled branches.  In exposed sites, wrapping or mulching may be needed for winter protection.

Hazel/Filbert (Corylus)- Open center, with moderate pruning to stimulate growth.

Jujube (Zizyphus)- Minimal pruning needed.

Juneberry (Amelanchier)-  Minimal pruning needed.

Medlar (Mespilus)- Minimal pruning needed.

Mulberry (Morus)- Minimal pruning needed.  May be severely cut back to maintain smaller size.

Pawpaw (Asimina)- Minimal pruning needed.

Peach (Prunus persica)- Prune during or just after flowering.  Remove up to 50% each year.  Open center form.  Thin fruit to 8” apart.

Pear and Asian Pear (Pyrus)- Central leader or modified central leader.  Spreading/bending branches is recommended.  Thin fruit to 5” apart.

Persimmon (Diospyros)- Modified central leader.  Shorten long willowy shoots.

Plum (Prunus)- Open center form, except for European varieties that prefer central leader.  Thin to 2” apart on heavy bearing varieties.

 

pruning tools

MOST IMPORTANT PRUNING EQUIPMENT

As with most tools, don’t buy the cheapest available!  Quality tools will perform better and last longer.  

  • Bypass hand pruner
  • Hand saw
  • Bypass loppers
  • Blade sharpener
  • Alcohol spray bottle (for sterilization)

When your trees get larger, you’ll likely also need:

  • Pole pruner
  • Pole saw
  • Orchard ladder (tripod)
  • Bow saw (for larger branches)

 

MORE PRUNING RESOURCES:

http://www.plantamnesty.org/pruning-literature

Lee Reich, The Pruning Book and Grow Fruit Naturally

Carla Emery, The Encyclopedia of Country Living

Michael Phillips, The Holistic Orchard

 

SUPPORT US!  If you found this entry useful, informative, or inspiring, please consider a donation of any size to help POP in planting and supporting community orchards in Philadelphia: phillyorchards.org/donate.